Tube Cutting Machines
Tube Cutting Machines AS60
Cutting and forming tubes up to Ø 60 mm
AS60 Standard
Straight machine front.
tube diameter up to 60 mm
AS60 S
Space saving designed machine-front.
For cutting and forming complex geometries.
tube diameter up to 36 mm
AS60 Servo
Servo-controlled axis for multi-stage cutting
and forming.
Both tube ends can individually be processed by free programmable steps.
tube diameter up to 36 mm
Special Features:
- Chipless cutting and forming in one step
- Cycle time less 5 seconds possible
- No contamination of the pipes caused by chips or emulsion
- Wall-thickness from 0.1 up to 1,5 mm
- Cutting of multilayer pipes
- Close to bend cuts are possible
- Very precise adjustment of the cutting-gap with a precision of 1/100 mm
- Lightweight and space-saving design
- Power requirements electric 230V / 2kw, pneumatic 6 bar
- High lifetime of cutting tools
- for example: Ø 25x1.0 / 1.4509 more than 100.000 cuts
- Low tool costs
- Low setup times and setup costs through modular cutting tools
Options:
Sensors:
- Detection end of cut
- Sensorcontrolled waste-part monitoring
- Fixture-side tube detection
Control:
- Program reception
- Cutting force adjustment by touch-panel
- Menu settings dialog
- Remote access via Internet
- Robot connection
Customer Solutions:
- Simultaneous cutting of both tube ends possible
- cutting and calibration in one step
- flexible mountingtable
- minimization of the particles by blocking-air
- all customer requests will be realized
- customer specific fixtures with pneumatic clampers
Highest profitability due to low-energy balances.
Tube Cutting Machines AS80
Cutting and forming tubes up to Ø 80 mm
AS80 Standard
Pneumatic driven axis.
AS80 Servo
Servo-controlled axis for multi-stage cutting and forming.
Both tube ends can individually be processed by free programmable steps.
Special Features:
- Chipless cutting and forming in one step
- Cycle time less 8 seconds possible
- No contamination of the pipes caused by chips or emulsion
- Wall-thickness from 0.1 up to 1,5 mm
- Cutting of multilayer pipes
- Close to bend cuts are possible
- Very precise adjustment of the cutting-gap with a precision of 1/100 mm
- Lightweight and space-saving design
- Power requirements electric 230V / 2kw pneumatic 6 bar
- High lifetime of cutting tools
- for example: Ø 55x1.5 / 1.4828 more than 40.000 cuts
- Low tool costs
- Low setup times and setup costs through modular cutting tools
Options:
Sensors:
- Detection end of cut
- Sensorcontrolled waste-part monitoring
- Fixture-side tube detection
Control:
- Program reception
- Cutting force adjustment by touch-panel
- Menu settings dialog
- Remote access via Internet
- Robot connection
Customer Solutions:
- tube diameter over 80 mm
- cutting and calibration in one step
- flexible mountingtable
- customer specific fixtures with pneumatic clampers
Highest profitability due to low-energy balances.